Tektronix 2440 500 Ms/s Oscilloscope

Description

This equipment has been tested. Please refer to the tests/remarks section below for details.

SERIAL NO: H700864

TESTS/REMARKS:

• 300 MHz BW, No pouch, No handles
• Option 05 Video
• Option 1R Rackmounting
• Fully operational

MANUFACTURER DESCRIPTION:

Tektronix 2440 500 Ms/s Oscilloscope

Bandwidth 300 MHz (Limit: 20, 100, Full)
Rise time 1.2 ns (Repeat on, 16×averaging)
Sampling rate 500 MSa/s each channel with simultaneous acquisition
Sampling type Real time: 100 ns/Div and slower, Equivalent time 50 ns/Div and faster
Single event bandwidth 200 MHz
Deflection 2 mV/div to 5 V/div in 1-2-5 sequence
Resolution 8 bit
Record length 1024 samples
Auto scale factor On-Screen Readout indicates probe tip deflection factors for ×1, ×10, ×100 and ×1000 probes
Input impedance 1 MΩ // 15 pF or 50Ω
Sweep speeds 2 ns/div to 5 s/div in 1-2-5 sequence (Modes A, A Intensified and B)
Auto measure Simultaneously measures up to four parameters on one or more displayed waveforms, updated at 3 Hz intervals or display a snapshot of 20 parameters of waveform target
Acquisition modes Normal, Envelope (glitch capture), Average
Display modes CH1, CH2, invert, add, multiply, X-Y
Cursors Volts, Time, Volts At Time, 1/Time, Slope
Functions A Mode – Auto Level, Auto/Roll, Normal and Single Seq; B Mode – Trigger After Delay, Runs After Delay, 1K Record Length and more
Interface GPIB
Probes Two passive P6137 400 MHz ×10 voltage probes, 1.3 m
Power 90 to 132 VAC or 80 to 250 VAC, 48 to 440 Hz; 160 W
Features
Autoprobe Function With P6137 Probe
300 MHz X-Y bandwidth at probe tip
Automatic measurements
extensive triggering capabilities
Printer/Plotter Output
On-screen HELP text describing every front-panel control