£375.00
The WaveTek 296 Synthesized Multichannel Arbitrary Waveform Generator combines sophisticated performance with ease of use in a way previously not available in arbitrary waveform generators.
Description
This equipment has been tested. Please refer to the tests/remarks section below for details.
SERIAL NO: 42668
MANUFACTURER DESCRIPTION:
The WaveTek 296 and 295 combine sophisticated performance with ease of use in a way previously not available in arbitrary waveform generators.
Model 296 adds advanced waveform sequencing capability up to 4,096 waveform segments for complex waveform generation. It also provides a 16 bit digital output on each channel. Both models can contain up to four separate channels. When run independently, each channel is essentially a stand-alone arbitrary waveform generator.
When in master/slave mode, phase relationships between channels can be set by the user. Each channel outputs 15 Vp-p (into 50 Ω load) at 50 MS/s sampling frequency maximum or can output 100 volts peak-topeak when Option 007 is installed. Each channel has a high-speed clock output that runs at a maximum of 100 MHz. Arbitrary waveforms can be created and stored to nonvolatile RAM or on the standard MS-DOS™ compatible 3.5-inch, high-density disk drive.
In addition, ten commonly used synthesized functions are built in. The graphic user interface greatly simplifies creating and editing waveforms, which can be viewed on an oscilloscope. A mouse can be used to draw on a scope when creating waveforms and to make selections on the graphical interface when setting up the instrument.
TESTS/REMARKS:
- Test all modes including sine/square/triangle/arbitrary, all OK
- All buttons work
- Slight fan noise
- Case in good condition – small scratch / mark on display panel.
*Note: This item is sold via our partner company and subject to the standard rate VAT @ 20%
